Acura 2010 ZDX User Manual Page 592

  • Download
  • Add to my manuals
  • Print
  • Page
    / 643
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 591
4. Connect the second jumper cable
to the negative () terminal on
the booster battery. Connect the
other end to the engine hanger as
shown. Do not connect this jumper
cable to any other part of the
engine.
5. If the booster battery is in another
vehicle, have an assistant start that
vehicle and run it at a fast idle.
6. Start your vehicle. If the starter
motor still operates slowly, check
that the jumper cables have good
metal-to-metal contact.
7. Once the vehicle is running,
disconnect the negative cable from
your vehicle, then from the
booster battery. Disconnect the
positive cable from your vehicle,
and then from the booster battery.
Keep the ends of the jumper cables
away from each other and any metal
on the vehicle until everything is
disconnected. Otherwise, you may
cause an electrical short.
Jump Starting
588
2010 ZDX
Page view 591
1 2 ... 587 588 589 590 591 592 593 594 595 596 597 ... 642 643

Comments to this Manuals

No comments