Acura 2010 ZDX User Manual Page 559

  • Download
  • Add to my manuals
  • Print
  • Page
    / 643
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 558
Headlight Aiming
The headlights were properly aimed
when your vehicle was new. If you
regularly carry heavy items in the
cargo area or pull a trailer,
readjustment may be required.
Adjustments should be done by your
dealer or another qualified
technician.
Low/High Beam Headlight Bulb
Replacement
The low/high beam headlight bulbs
are a type of high voltage discharge
tube. High voltage can remain in the
circuit even with the light switch off
and the key removed (or the vehicle
is in VEHICLE OFF (LOCK) mode
on models with keyless access
system). Because of this, you should
not attempt to examine or change a
low/high beam headlight bulb
yourself. If a low/high beam
headlight bulb fails, take the vehicle
to your dealer to have it replaced.
Replacing Front Turn Signal/
Parking and Side Marker Light
Bulbs
1. Open the hood.
2. Remove the front bulkhead cover
and engine compartment covers
(see page 544).
3. Remove the socket by turning it
one-quarter turn counterclockwise.
4. Pull the bulb straight out of its
socket.
5. Push the new bulb straight into
the socket until it bottoms.
6. Insert the socket back into the
headlight assembly. Turn it
clockwise to lock it in place.
7. Turn on the lights to make sure
the new bulb is working.
FRONT TURN SIGNAL/PARKING LIGHT
SOCKET
BULB
SIDE MARKER LIGHT
SOCKET
BULB
CONTINUED
Lights
555
Maintenance
2010 ZDX
Page view 558
1 2 ... 554 555 556 557 558 559 560 561 562 563 564 ... 642 643

Comments to this Manuals

No comments