Acura 2010 ZDX User Manual download pdf (Page 154)

On models without keyless access

system

The ignition switch has four

positions: LOCK (0), ACCESSORY

(I), ON (II), and START (III).

LOCK (0) － You can insert or

remove the key only in this position.

To turn the key to the LOCK (0)

position, the shift lever must be in

Park, and you must push the key in

slightly.

If the front wheels are turned, the

anti-theft lock may make it difficult to

turn the key. Firmly turn the steering

wheel to the left or right as you turn

the key.

ACCESSORY (I) － You can operate

the audio system and the accessory

power sockets in this position.

ON (II) － This is the normal key

position when driving. Several of the

indicators on the instrument panel

come on as a test when you turn the

ignition switch from the

ACCESSORY (I) to the ON (II)

position.

START (III) － Use this position

only to start the engine. The switch

returns to the ON (II) position when

you let go of the key.

You will hear a reminder beeper if

you leave the key in the ignition

switch in the LOCK (0) or the

ACCESSORY (I) position and open

the driver's door. Remove the key to

turn off the beeper.

You will also see a ‘‘REMOVE KEY’’

message on the multi-information

display.

The shift lever must be in Park

before you can remove the key from

the ignition switch.

Ignition Switch

150

2010 ZDX

1 2 ... 149 150 151 152 153 154 155 156 157 158 159 ... 642 643

Comments to this Manuals

No comments