Acura 2010 ZDX User Manual download pdf (Page 163)

To replace the battery:

1. Remove the screw at the base of

the transmitter with a small

Phillips-head screwdriver.

NOTE: Be careful when removing

this screw as the head of the screw

can strip out.

2. Separate the keypad from the

transmitter by pushing any button

from outside.

3. Place a cloth on the edge of the

keypad to prevent scratches, and

remove the upper half by carefully

prying on the edge with a small

flat-tip screwdriver.

4. Remove the old battery and note

the polarity. Make sure the

polarity of the new battery is the

same (－ side facing up), then

insert it in the keypad.

An improperly disposed of battery

can hurt the environment.

Always confirm local regulations

for battery disposal.

5. Snap the two halves of the keypad,

then install the parts in reverse

order.

SCREW KEYPAD

BATTERY

CONTINUED

Remote Transmitter

159

Instruments and Controls

2010 ZDX

1 2 ... 158 159 160 161 162 163 164 165 166 167 168 ... 642 643

Comments to this Manuals

No comments