Acura 2010 ZDX User Manual Page 573

  • Download
  • Add to my manuals
  • Print
  • Page
    / 643
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 572
Tire Inspection
Every time you check inflation, you
should also examine the tires for
damage, foreign objects, and wear.
You should look for:
Bumps or bulges in the tread or
side of the tire. Replace the tire if
you find either of these conditions.
Cuts, splits, or cracks in the side of
the tire. Replace the tire if you can
see fabric or cord.
Excessive tread wear.
Your tires have wear indicators
molded into the tread. When the
tread wears down, you will see a 1/2
inch (12.7 mm) wide band across the
tread. This shows there is less than
1/16 inch (1.6 mm) of tread left on
the tire.
A tire this worn gives very little
traction on wet roads. You should
replace the tire if you can see three
or more tread wear indicators.
Tire Service Life
The service life of your tires is
dependent on many factors,
including, but not limited to, driving
habits, road conditions, vehicle
loading, inflation pressure,
maintenance history, speed, and
environmental conditions (even
when the tires are not in use).
In addition to your regular
inspections and inflation pressure
maintenance, it is recommended that
you have annual inspections
performed once the tires reach five
years old. It is also recommended
that all tires, including the spare, be
removed from service after 10 years
from the date of manufacture,
regardless of their condition or state
of wear.
The last four digits of the TIN (tire
identification number) are found on
the sidewall of the tire and indicate
the date of manufacture (See Tire
Labeling on page 612).
INDICATOR LOCATION MARKS
TREAD WEAR INDICATORS
CONTINUED
Tires
569
Maintenance
2010 ZDX
Page view 572
1 2 ... 568 569 570 571 572 573 574 575 576 577 578 ... 642 643

Comments to this Manuals

No comments