Acura 2010 ZDX User Manual download pdf (Page 507)

CMBS Indicator

This indicator comes on for several

seconds when you select the ON

mode by operating the engine start/

stop button (see page 194). It also

comes on and stays on when you

turn the CMBS off by pressing the

CMBS OFF button.

To turn the CMBS back on, make

sure the vehicle is stopped and the

power mode is set to ON, then press

the CMBS OFF switch for about 1

second.

The CMBS indicator normally comes

on under these conditions:

●

When you manually turn off the

system.

●

When the system shuts off

automatically.

●

When you drive in bad weather

(rain, snow, fog, etc.).

●

If anything covers the radar sensor

cover (dirt, mud, dry leaves, wet

snow, etc.).

●

When the VSA system indicator

comes on (see page 508).

●

When you select the ON mode by

operating the engine start/stop

button, the CMBS indicator should

come on for a few seconds, then

go off. If the indicator comes on at

any other time and a CHECK

CMBS SYSTEM message appears

on the multi-information display,

there is a problem with the CMBS.

You can still drive your vehicle,

but CMBS will not be operating.

Have your vehicle checked by a

dealer.

CMBS

INDICATOR

U.S. model is shown.

CONTINUED

Collision Mitigation Braking System™ (CMBS™)

503

Driving

2010 ZDX

1 2 ... 502 503 504 505 506 507 508 509 510 511 512 ... 642 643

Comments to this Manuals

No comments