Acura 2010 ZDX User Manual download pdf (Page 560)

Replacing a Daytime Running

Light Bulb

1. Open the hood.

To change the bulb on the driver's

side, remove the clips by pushing

the center of the clips. Lift the

grommet over the stud bolt and

rotate the heat shield

counterclockwise.

To change the bulb on the

passenger's side, remove the

power steering fluid reservoir by

pulling it out of its stay.

2. Remove the front bulkhead cover

and engine compartment covers

(see page 544).

3. Remove the electrical connector

from the bulb by pushing on the

tab and pulling the connector

down.

4. Remove the bulb by turning it one-

quarter turn counterclockwise.

5. Install the new bulb into the hole,

and turn it one-quarter turn

clockwise to lock it in place.

6. Push the electrical connector back

onto the bulb. Make sure it is on

all the way.

7. Test the lights to make sure the

new bulb is working.

8. Reinstall the front bulkhead cover

and engine compartment covers.

On the driver's side

Reinstall the heat shield.

On the passenger's side

Reinstall the power steering fluid

reservoir.

CLIP HEAT SHIELD

GROMMET

STUD BOLT

CONNECTOR

BULB

Lights

556

2010 ZDX

1 2 ... 555 556 557 558 559 560 561 562 563 564 565 ... 642 643

Comments to this Manuals

No comments