Acura 2010 ZDX User Manual download pdf (Page 191)

When you lock the doors, some

exterior lights blink and the system

beeps once. If no exterior lights blink

and/or no beeper sounds, check to

see if the tailgate or hood is open.

To change the ‘‘KEYLESS ACCESS

LIGHT FLASH’’ setting, see page

120.

To change the ‘‘KEYLESS ACCESS

BEEP’’ setting, see page 121.

Within 2 seconds of pressing the

door lock button to lock the doors or

locking the doors with remote, pull

the handle to make sure the doors

are actually locked. The door unlock

sensors will not operate for about 2

seconds after the doors are locked.

The door lock button does not work

if:

●

The remote is not within the

operating range.

●

Any door is open.

●

The power mode is not set to

VEHICLE OFF (LOCK).

●

The remote is in the keyless

access slot.

●

The remote is too close to the

vehicle.

●

The remote battery is dead.

●

The vehicle battery is dead.

Door Lock Prevention

If you open the driver's door, pull its

lock tab rearward on the door, and

shut it when the remote is inside the

vehicle, the driver's door will unlock.

Make sure you carry the remote with

you when you lock the doors.

This function is also activated on the

front passenger's door. If you open

the front passenger's door, and shut

it after pulling its lock tab rearward

when the remote is inside the

vehicle, all doors will unlock.

CONTINUED

Keyless Access System

187

Instruments and Controls

2010 ZDX

1 2 ... 186 187 188 189 190 191 192 193 194 195 196 ... 642 643

Comments to this Manuals

No comments