Acura 2008 RDX User Manual download pdf (Page 355)

CONTINUED

Use a Phillips-head screwdriver to

remove the screw and use a flat-

tipped screwdriver to remove the

holding clip located under the

front bumper.

Push up the undercover.

Your vehicle uses halogen light

bulbs. When replacing a bulb, handle

it by its plastic case, and protect the

glass from contact with your skin or

hard objects. If you touch the glass,

clean it with denatured alcohol and a

clean cloth.

Turn on the lights to make sure

the new bulb is working.

Put the socket back into the light

assembly, and turn it clockwise to

lock it in place.

Install the rear light assembly in

the rear pillar. Tighten the two

bolts. Snap the bolt covers into

position.

1.

2.

6.

7.

8.

Lights

Replacing a Front Fog Light Bulb

Maintenance

351

HOLDING CLIP

SCREW

Halogen bulbs get very hot when lit.

Oil, perspiration, or a scratch on the

glass can cause the bulb to overheat

and shatter.

０７／０６／０１１９：１６：５６３１ＳＴＫ６１００３５６

2008 RDX

Table Of Contents

Main Menu

1 2 ... 350 351 352 353 354 355 356 357 358 359 360 ... 432 433

Comments to this Manuals

No comments