Acura 2008 RDX User Manual Page 382

  • Download
  • Add to my manuals
  • Print
  • Page
    / 433
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 381
Connect one jumper cable to the
positive ( ) terminal on your
battery. Connect the other end to
the positive ( ) terminal on the
booster battery.
If the booster battery is in another
vehicle, have an assistant start
that vehicle and run it at a fast idle.
Start your vehicle. If the starter
motor still operates slowly, check
that the jumper cables have good
metal-to-metal contact.
Connect the second jumper cable
to the negative ( ) terminal on
the booster battery. Connect the
other end to the grounding point
as shown. Do not connect this
jumper cable to any other part of
the engine.
Once your vehicle is running,
disconnect the negative cable from
your vehicle, then from the
booster battery. Disconnect the
positive cable from your vehicle,
then from the booster battery.
Keep the ends of the jumper cables
away from each other and any metal
on the vehicle until everything is
disconnected. Otherwise, you may
cause an electrical short.
3.
4.
5.
6.
7.
Jump Starting
378
07/06/01 19:20:28 31STK610 0383 
2008 RDX
Table Of Contents
Main Menu
Page view 381
1 2 ... 377 378 379 380 381 382 383 384 385 386 387 ... 432 433

Comments to this Manuals

No comments