Acura 2008 RDX User Manual download pdf (Page 279)

▲▼

Turn the engine off, and confirm the

fuel fill cap is installed. If it is, loosen

it, then retighten it until it clicks at

least once. When you can restart the

engine, the message appears again.

The message goes off after several

days of normal driving once you

tighten or replace the fuel fill cap. To

scroll to another message, press the

INFO ( / ) button.

If the system still detects a leak in

your vehicle’s evaporative emissions

system, the malfunction indicator

lamp (MIL) comes on. If the fuel fill

cap was not already tightened, turn

the engine off, and check or

retighten the fuel fill cap until it

clicks at least once. The MIL should

go off after several days of normal

driving once the cap is tightened or

replaced. If the MIL does not go off,

have your vehicle inspected by a

dealer. For more information, see

page .

Park the vehicle, and set the

parking brake. Pull the hood

release handle located under the

lower left corner of the dashboard.

The hood will pop up slightly.

Put your fingers under the front

edge of the hood near the center.

Slide your hand to the left until

you feel the hood latch handle.

Push this handle up to release it.

Lift up the hood.

If the hood latch handle moves stiffly,

or if you can open the hood without

lifting the handle, the mechanism

should be cleaned and lubricated.

1. 2.

382

CONTINUED

Opening and Closing the Hood

Before Driving

275

HOOD RELEASE HANDLE

LATCH

０７／０６／０１１９：０７：０６３１ＳＴＫ６１００２８０

Service Station Procedures

2008 RDX

Table Of Contents

Main Menu

1 2 ... 274 275 276 277 278 279 280 281 282 283 284 ... 432 433

Comments to this Manuals

No comments