6 of 30 BII 13404 (1301) © 2013 American Honda Motor Co., Inc. – All Rights Reserved.
10. Apply tape to the center console panel and the
driver’s and passenger’s console side trims as
shown. With the vehicle’s parking brake set and
wheels chocked, move the shift lever to the N
(neutral) position, and wrap a shop towel around the
shift lever.
11. Remove the center lower trim (three clips, and
unplug the vehicle connectors).
SHOP
TOWEL
TAPE
SHIFT LEVER
(N POSITION)
PASSENGER’S
CONSOLE
SIDE TRIM
CENTER
CONSOLE
PANEL
3 CLIPS
VEHICLE
CONNECTORS
CENTER LOWER
TRIM
12. Remove the center lower panel (six clips, four hooks,
and unplug the vehicle connectors).
13. Pull away the door opening seal, and remove the
driver’s dashboard side lid (four clips, two retaining
tabs, and three hooks).
VEHICLE
CONNECTORS
CENTER
LOWER
PANEL
6 CLIPS
2 HOOKS
2 HOOKS
2 RETAINING
TABS
4 CLIPS
3 HOOKS
DOOR OPENING
SEAL
(Pull away.)
FRONT
DRIVER’S
DASHBOAR
D SIDE LID
Comments to this Manuals