Acura Remote Engine Start System 2 Service Manual download pdf (Page 4)

6. Remove the driver’s sunvisor:

• Pivot the driver’s sunvisor downward.

• Wrap tape around the tip of flat-tip screwdriver.

• Locate the slot in the bracket cover, and insert

the flat-tip screwdriver into the slot. Push in and

hold the hook.

• While holding the hook, push up on the sunvisor

and rotate it toward the door.

NOTE: If the hook did not stay pushed in, return the

sunvisor to its original position and repeat this step.

QB40202AJ

HOOK

FLAT-TIP

SCREWDRIVER

TAPE

BRACKET COVER

DRIVER’S

SUNVISOR

Push the hook.

While pushing in on

the hook, rotate the

sunvisor toward the

door.

Make sure the

hook slides

into the

bracket cover.

FRONT

• Unplug the vehicle connector, and remove the

driver’s sunvisor.

7. Remove the driver’s A-pillar trim.

• Pull away the driver’s door opening seal from the

A-pillar trim.

• Gently pull the A-pillar trim away from the A-pillar

to release the three clips.

DRIVER’S

SUNVISOR

VEHICLE

CONNECTOR

QB40204AJ

Pull the clip.

2 CLIPS

DRIVER’S

A-PILLAR

TRIM

DRIVER’S A-PILLAR

DRIVER’S DOOR

OPENING SEAL

(Pull away.)

QB40203AJ

1 2 3 4 5 6 7 8 9 ... 29 30

Comments to this Manuals

No comments

Acura Remote Engine Start System 2 Service Manual Page 4

Comments to this Manuals

Related products and manuals for Motor vehicle electronics Acura Remote Engine Start System 2