Acura Remote Engine Start System 2 Service Manual download pdf (Page 29)

FUNCTION CHECK

Operating Conditions

• The hood is closed

• The shift lever is in park

• Turn the ignition switch off and the key is outside the vehicle

• All doors and trunk lid closed and locked

Inspection

1. Press the engine/command button on the transmitter, and release, within 2 seconds, press the lock/start button on

the transmitter.

The engine should start if all operating conditions are met. (Refer to the engine starter operation.)

Does the engine start?

2. Press the engine/command button on the transmitter

and release, within 2 seconds, press the unlock/stop

button. The engine should stop.

Does the engine stop?

3. After the engine has stopped, start the engine again,

and check that the engine stops after each of the

following conditions:

NOTE: After each test the ignition key must be cycled, or the

driver’s door must be opened and closed.

• Move the shift lever out of the P position.

• Unlock or open the doors or the trunk lid.

• Open the hood.

• Press on the brake pedal.

• Press the engine start/stop button.

Does the engine stop after each of these tests?

4. Check that the power windows and the moonroof do not function, and the shift lever does not move to any position

when the engine is started with the transmitter.

5. Check that the engine does not start under “Operating Conditions” with the key left inside the vehicle.

6. Start the engine again, press the engine/command button on the transmitter two times, and check the vehicle

condition on the display.

7. Check the operation of the transmitter when the vehicle is 120 m (400 ft.) away and in direct sight.

Yes - Operation is normal.

No:

• Make sure all “Operating Conditions” are met.

• Check the engine starter harness connections.

• Connect the HDS/MVCI and check for an indicated

failure. (Refer to the appropriate Service Manual for

details.)

Yes - Operation is normal.

No - Check the engine starter harness connections.

Yes - Operation is normal.

No - Check the engine starter harness connections.

B127121H

ENGINE/

COMMAND

BUTTON

UNLOCK/

STOP

BUTTON

RECEPTION

INDICATOR

CHECKING

INDICATOR

ENGINE START

OPERATION

Blinking

ENGINE

RUNNING

INDICATOR

IN-CAR

TEMPERATURE

REMAINING

IDLING TIME

*1 Only on vehicles equipped with the automatic climate control.

This indicator is displayed for some vehicles among them.

LOCK/

START

BUTTON

1 2 ... 24 25 26 27 28 29 30

Comments to this Manuals

No comments

Acura Remote Engine Start System 2 Service Manual Page 29

Comments to this Manuals

Related products and manuals for Motor vehicle electronics Acura Remote Engine Start System 2