Acura 2008 RL User Manual download pdf (Page 404)

Remove the oil filter, and let the

remaining oil drain. A special

wrench (available from your

dealer) is required.

Refill the engine with the

recommended oil.

Engine oil change capacity

(including filter):

Replace the engine oil fill cap.

Start the engine. The oil pressure

indicator should go out within 5

seconds. If it does not, turn off the

engine, and check your work.

Let the engine run for several

minutes, then check the drain bolt

and oil filter for leaks.

Turn off the engine and let it sit

for several minutes, then check

the oil level on the dipstick. If

necessary, add more oil.

Put a new washer on the drain bolt,

then reinstall the drain bolt.

Tighten the drain bolt to:

Install a new oil filter according to

the instructions that come with it.

Make sure the oil filter gasket is

not stuck to the engine block. If it

is, remove it before installing a

new oil filter.

3.

6.

7.

8.

9.

5.

4.

Changing the Engine Oil and Filter

Maintenance

401

OIL FILTER

29 lbf·ft (39 N·m , 4.0 kgf·m)

4.5 US qt (4.3

)

Improper disposal of engine oil can be

harmf ul to the environment. If you

change your own oil, please dispose of

the used oil properly. Put it in a sealed

container, and take it to a recycling

center. Do not discard it in a trash bin

or dump it on the ground.

０７／０５／１７０９：４９：２４３１ＳＪＡ６３００４０６

2008 RL

Table Of Contents

Main Menu

1 2 ... 399 400 401 402 403 404 405 406 407 408 409 ... 499 500

Comments to this Manuals

No comments