Acura 2011 MDX User Manual download pdf (Page 364)

100

101

The HomeLink

Universal

Transceiver built into your vehicle can

be programmed to operate up to three

remote controlled devices around

your home, such as garage doors,

lighting, or home security systems.

General Safety Information

Before programming your HomeLink

to operate a garage door opener,

confirm that the opener has an

external entrapment protection

system, such as an ‘‘electronic eye,’’ or

other safety and reverse stop features.

If your garage door was manufactured

before April 1, 1982, you may not be

able to program HomeLink to operate

it. These units do not have safety

features that cause the motor to stop

and reverse it if an obstacle is

detected during closing, increasing

the risk of injury. Do not use

HomeLink with any garage door

opener that lacks safety stop and

reverse features.

Units manufactured between April 1,

1982 and January 1, 1993 may be

equipped with safety stop and reverse

features. If your unit does not have an

external entrapment protection

system, an easy test to confirm the

function and performance of the safety

stop and reverse feature is to lay a

╳ 4 under the closing door. The door

should stop and reverse upon

contacting the piece of wood.

As an additional safety feature, garage

door openers manufactured after

January 1, 1993 are required to have

external entrapment protection

systems, such as an electronic eye,

which detect an object obstructing the

door.

Important Safety Precautions

Refer to the safety information that came

with your garage door opener to test that

the safety features are functioning

properly. If you do not have this

information, contact the manufacturer of

the equipment.

Before programming HomeLink to a

garage door or gate opener, make sure

that people and objects are out of the way

of the device to prevent potential injury or

damage.

When programming a garage door opener,

park just outside the garage.

Training HomeLink

Before you begin

－ If you just

received your vehicle and have not

trained any of the buttons in

HomeLink before, you should erase

any previously learned codes before

training the first button.

To do this, press and hold the two

outside buttons on the HomeLink

transceiver for about 20 seconds,

until the red indicator flashes.

Release the buttons, then proceed to

step 1.

HomeLink

Universal Transceiver

360

10/06/29 11:59:04 11 ACURA MDX MMC North America Owner's M 50 31STX640 enu

2011 MDX

1 2 ... 359 360 361 362 363 364 365 366 367 368 369 ... 606 607

Comments to this Manuals

No comments

Acura 2011 MDX User Manual Page 364

Comments to this Manuals

Related products and manuals for Cars Acura 2011 MDX