Acura 2011 MDX User Manual download pdf (Page 161)

In the HI setting, the heater turns off

when the seat gets warm, and turns

back on after the seat's temperature

drops.

In the LO setting, the heater runs

continuously. It does not cycle with

temperature changes.

Follow these precautions when using

the seat heaters:

●

Use the HI setting only to heat the

seats quickly, because it draws

large amounts of current from the

battery.

●

If the engine is left idling for an

extended period, do not use the

seat heaters even on the LO

setting. It can weaken the battery,

causing hard starting.

A multi-information display message

may inform you when the battery

charge is getting low. See page 82 for

more information.

Seat Heaters and Seat Ventilation

If equipped

Both front seats are equipped with

seat heaters and an air ventilation

system. The passenger seat only has

heaters in the seat bottom because of

the side airbag system.

The ignition switch must be in the

ON (II) position to use the heaters

and the air ventilation system.

To use the heaters, press the

button. The indicator (red) next to

the button will come on. There are

four settings in the heaters:

HI － Three indicators on.

MID － Two indicators on.

LO － One indicator on.

OFF － All indicators off.

Passenger's

seat

HEATERS

Driver's

seat

VENTS

FRONT SEAT HEATER AND

SEAT VENTILATION

SWITCHES

INDICATOR

CONTINUED

Seat Heaters, Seat Heaters and Seat Ventilation

157

Instruments and Controls

10/06/29 11:59:04 11 ACURA MDX MMC North America Owner's M 50 31STX640 enu

2011 MDX

1 2 ... 156 157 158 159 160 161 162 163 164 165 166 ... 606 607

Comments to this Manuals

No comments