Acura Remote Engine Start System 2 Service Manual Page 21

  • Download
  • Add to my manuals
  • Print
  • Page
    / 22
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 20
© 2011 American Honda Motor Co., Inc. – All Rights Reserved. BII 45421 (1103) 21 of 22
732904AY
DISPLAY
COMMAND
BUTTON
START
BUTTON
TRANSMITTER
STOP
BUTTON
FUNCTION CHECK
Operating Conditions
Hood is closed
Shift lever in park
The key is out of the ignition and the key is outside the vehicle
All doors and trunk lid closed and locked
Inspection
1. Press the command button, and then, within 1 second, press the start button on the transmitter. The engine should
start if all operating conditions are met.
Does the engine start?
2. Press the command button on the transmitter and, within
1 second, press the stop button. The engine should stop.
Does the engine stop?
3. After the engine has stopped, start the engine again, and
check that the engine stops after each of the following
conditions:
Yes - Operation is normal.
No:
Make sure all “Operating Conditions” are met.
Check the engine starter harness connections.
Connect the HDS and check for an indicated failure.
(Refer to the appropriate service manual for details.)
Yes - Operation is normal.
No - Check the engine starter harness connections.
NOTE: After each test the driver’s door must be opened and closed.
Move the shift lever out of the P position.
Unlock or open the doors or the trunk lid.
Open the hood.
Insert the key in the ignition switch.
Press the brake pedal.
Does the engine stop after each of these tests?
4. Check that the power windows and the moonroof do not function, and the shift lever does not move to any position
but the P position when the engine is started with the transmitter.
5. Press the command button on the transmitter two times, and check the vehicle condition on the display.
6. Check the operation of the transmitter when the vehicle is 100 m to 150 m (325 to 490 ft.) away and in direct sight.
Yes - Operation is normal.
No - Check the engine starter harness connections.
Page view 20
1 2 ... 16 17 18 19 20 21 22

Comments to this Manuals

No comments