Acura Remote Engine Start System 2 Service Manual download pdf (Page 17)

65. Secure the engine starter harness to the vehicle

harness with two wire ties as shown.

66. Using isopropyl alcohol on a shop towel, clean the

area where the caution label will attach.

67. Attach the caution label to the hood in the area

shown.

830651CT

WIRE

TIES

VEHICLE HARNESS

ENGINE STARTER

HARNESS

VEHICLE

CLIP

VEHICLE

CLIP

925002AT

Clean with

isopropyl alcohol.

HOOD

CAUTION

LABEL

68. Check that all wire harnesses and cables are routed

properly and that all connectors are plugged in.

69. Reinstall all removed parts except for the front

bulkhead cover. Take care not to pinch the side

curtain airbag with the clip during reinstallation of the

left front A-pillar trim. Do not push on the front pillar

trim excessively.

70. Reconnect the negative cable to the battery.

71. Check the operation of the headlights and

windshield wipers/washers.

72. Reinstall the front bulkhead cover.

73. Enter the anti-theft codes for the audio system and

the navigation system (if equipped).

74. Reset the clock on vehicles without navigation.

75. Do the REMOTE ENGINE STARTER

REGISTRATION (Page 18), and the FUNCTION

CHECK (Page 21).

1 2 ... 12 13 14 15 16 17 18 19 20 21 22

No comments

Acura Remote Engine Start System 2 Service Manual Page 17