Acura 2015 RDX User Manual download pdf (Page 229)

228

Reference Information

System Initialization

The navigation system must be initialized if

power to the navigation system is

interrupted for any reason (e.g., the

battery was disconnected).

Entering the Security Code

Find the navigation system’s security code

and serial number label in your Owner’s

Manual kit. Do not store the label in your

vehicle. If you lose the label, you must first

retrieve the serial number, and then obtain

the code. You can find out about your

serial number and security code from a

dealer.

1. Set the power mode to ON, and turn on

the audio system.



If you set the power mode to

ACCESSORY, you will be requested

to enter the security code. See step 3.

2. Press and hold the VOL 9 (Volume/

Power) button for more than two

seconds.



The system is reactivated when the

system’s control unit recognizes that

the system is in your vehicle.

If the control unit fails to recognize,

“ENTER CODE” appears on the

navigation screen.

3. Enter the security code.



If you do not enter the security code

correctly after 10 tries, leave the

system for one hour before trying

again, or visit a dealer to have the

system reset.

NOTE:

In the U.S. you can register the security

code at Acura Owners

(owners.acura.com.), and find information

on how to retrieve the serial number and

obtain the code at radio-

navicode.acura.com.

Acquiring GPS Information

Depending on the length of time the

power was interrupted, your system may

require GPS initialization.

If initialization is not necessary, the system

proceeds directly to the Startup

Confirmation screen.

If the system fails to locate a sufficient

number of satellites to locate your position

within 10 minutes, the following screen is

displayed.

1 2 ... 224 225 226 227 228 229 230 231 232 233 234 ... 257 258

Comments to this Manuals

No comments