uuReplacing Light BulbsuFog Light Bulbs
248
3. Remove the coupler.
u It can be removed by pushing the tab.
4. Rotate the old bulb to the left to remove.
5. Insert a new bulb into the headlight
assembly and turn it to the right.
6. Insert the coupler into the connector of the
bulb.
High voltage can remain in the circuit for a long period of time after the light is
switched off. Do not attempt to inspect or replace the high voltage discharge type
bulbs yourself. Ask a dealer to inspect and replace low beam headlights.
Fog Light Bulbs
When replacing, use the following bulbs.
1. Remove the clip using a flat-tip screwdriver,
and lower the under cover.
Driver and passenger side
■
Low Beam Headlights
Fog Light: 55 W
Halogen bulbs get very hot when lit. Oil, perspiration,
or a scratch on the glass can cause the bulb to
overheat and shatter.
The fog lights are halogen bulbs.
When replacing a bulb, handle it by its plastic case,
and protect the glass from contact with your skin or
hard objects. If you touch the glass, clean it with
denatured alcohol and a clean cloth.
2012 TSX5D-31TL7610.book 248 ページ 2011年7月11日 月曜日 午前8時10分
Comments to this Manuals