Acura 2011 TL User Manual Page 450

  • Download
  • Add to my manuals
  • Print
  • Page
    / 614
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 449
Park the vehicle, and set the
parking brake. Pull the hood
release handle located under the
lower left corner of the dashboard.
The hood will pop up slightly.
The ‘‘TIGHTEN FUEL CAP’’
message will appear each time you
restart the engine until the system
turns the message off.
Turn the engine off, and confirm the
fuel fill cap is installed. If it is, loosen
it, then retighten it until it clicks at
least once. The message should go
off after several days of normal
driving once you tighten or replace
the fuel fill cap. To scroll to another
message, press the INFO button.
Your vehicle’s on board diagnostic
system will detect a loose or missing
fuel fill cap as an evaporative system
leak. The first time a leak is detected
a ‘‘TIGHTEN FUEL CAP’’ message
appears on the multi-information
display.
If the system still detects a leak in
your vehicle’s evaporative emissions
system, the malfunction indicator
lamp (MIL) comes on. If the fuel fill
cap was not already tightened, turn
the engine off, and check or
retighten the fuel fill cap until it
clicks at least once. The MIL should
go off after several days of normal
driving once the cap is tightened or
replaced. If the MIL does not go off,
have your vehicle inspected by a
dealer. For more information, see
page .
1.
562
CONTINUED
Service Station Procedure
Opening and Closing the HoodTighten Fuel Cap Message
Before Driving
447
HOOD RELEASE HANDLE
10/07/29 12:39:16 31TK4620_452
2011 TL
Page view 449
1 2 ... 445 446 447 448 449 450 451 452 453 454 455 ... 613 614

Comments to this Manuals

No comments