Acura 2011 TL User Manual Page 488

  • Download
  • Add to my manuals
  • Print
  • Page
    / 614
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 487
This switch is under the drivers
side vent. To turn the VSA system
on and off, press and hold it
until you hear a beep.
When VSA is off, the VSA OFF
indicator comes on as a reminder.
Press and hold the switch again. It
turns the system back on.
If the low tire pressure/TPMS
indicator comes on (see page ),
or the multi-information display
shows a ‘‘CHECK TPMS SYSTEM’’
message with the indicator flashing
(see page ), the VSA system
automatically turns on even if the
VSA system is turned off with the
VSA OFF switch. In this case, you
cannot turn the VSA system off by
pressing the VSA OFF switch again.
Without VSA, your vehicle will have
normal braking and cornering ability,
but it will not have VSA traction and
stability enhancement.
If there is a problem with the hill
start assist system, the VSA system
indicator comes on and stays on. The
multi-information display shows a
‘‘CHECK HILL START ASSIST
SYSTEM’’ message.
With the VSA system indicator on,
you may not be able to stop the
engine even if you park the vehicle
safely. To stop the engine, see
on
page
.186
487
491
CONTINUED
On models with SH-AWD
On models with keyless access system
VSA OFF Switch
Emergency Engine Stop
Vehicle Stability Assist (VSA ), aka Electronic Stability Control (ESC), System
Driving
485
VSA OFF SWITCH
10/07/29 12:44:20 31TK4620_490
2011 TL
Page view 487
1 2 ... 483 484 485 486 487 488 489 490 491 492 493 ... 613 614

Comments to this Manuals

No comments