Acura 2011 TL User Manual download pdf (Page 231)

−

−

−

The ignition switch must be in the

ACCESSORY (I) or ON (II) position.

Turn the system on by pushing the

VOL/ (power/volume) knob or

the AM/FM button. Adjust the

volume by turning the VOL/

knob.

The band and frequency that the

radio was last tuned to are displayed.

To change bands, press the AM/FM

button. On the FM band, ST will be

displayed if the station is

broadcasting in stereo. Stereo

reproduction in AM is not available.

On the AM band, AM noise

reduction turns on automatically.

You can use any of five methods to

find radio stations on the selected

band: tune, skip, scan, the preset

buttons, and auto select.

On the FM band, you can also use the

features provided by the radio data

system (RDS). For more information

on the RDS, see page 230.

Use the selector knob to

tune the radio to a desired frequency.

Turn the knob right to tune to a

higher frequency, or left to tune to a

lower frequency.

The skip function searches

up and down from the current

frequency to find a station with a

strong signal. To activate it, press

and hold the or side of the

SKIP bar until you hear a beep, then

release it.

The scan function samples

all stations with strong signals on the

selected band. To activate it, press

the SCAN button, then release it.

You will see SCAN in the display.

When the system finds a strong

signal, it will stop and play that

station for about 10 seconds.

If you do nothing, the system will

scan for the next strong station and

play it for 10 seconds. When it plays

a station that you want to listen to,

press the SCAN button again.

To Play the Radio To Select a Station

TUNE

SKIP

SCAN

Playing the AM/FM Radio (Models without navigation system)

228

10/07/29 12:09:30 31TK4620_233

2011 TL

1 2 ... 226 227 228 229 230 231 232 233 234 235 236 ... 613 614

Comments to this Manuals

No comments