Acura 2012 MDX User Manual

© 2011 American Honda Motor Co., Inc. – All Rights Reserved. BII 46637 (1110) 1 of 1208L92-STX-2A00-91BII 46637Publications No.Issue DateINSTALLATIONI

10 of 12 BII 46637 (1110) © 2011 American Honda Motor Co., Inc. – All Rights Reserved.38. Check that all wire harnesses and cables are routed properly

© 2011 American Honda Motor Co., Inc. – All Rights Reserved. BII 46637 (1110) 11 of 12Put a copy of this Page in the Glove Box for Your ClientInstalli

12 of 12 BII 46637 (1110) © 2011 American Honda Motor Co., Inc. – All Rights Reserved.CIRCUT DIAGRAMREAR FUSE BOXSMALLLIGHTBLK LEYULNRBDERBGRNWHT+BGND

2 of 12 BII 46637 (1110) © 2011 American Honda Motor Co., Inc. – All Rights Reserved.Control unit harnessSubharness2 Relays2 Fuses (7.5A)3 Fuses (2

© 2011 American Honda Motor Co., Inc. – All Rights Reserved. BII 46637 (1110) 3 of 12INSTALLATIONNOTE:• Be careful not to damage the rear bumper or ot

4 of 12 BII 46637 (1110) © 2011 American Honda Motor Co., Inc. – All Rights Reserved.6. Remove the left heat shield (three washer bolts).7. Remove the

© 2011 American Honda Motor Co., Inc. – All Rights Reserved. BII 46637 (1110) 5 of 1212. Torque the four 14 x 40 mm washer bolts to 95 N.m (70 lb-ft),

6 of 12 BII 46637 (1110) © 2011 American Honda Motor Co., Inc. – All Rights Reserved.17. Remove the two cargo lid hinges (two self-tapping screws), an

© 2011 American Honda Motor Co., Inc. – All Rights Reserved. BII 46637 (1110) 7 of 1221. Install the two relays into the control unit harness relay bl

8 of 12 BII 46637 (1110) © 2011 American Honda Motor Co., Inc. – All Rights Reserved.26. Slide the 7-pin socket into the socket bracket, and secure th

© 2011 American Honda Motor Co., Inc. – All Rights Reserved. BII 46637 (1110) 9 of 1231. Remove the vehicle ground bolt, then secure the trailer socke