Acura 2011 TSX User Manual Page 201

  • Download
  • Add to my manuals
  • Print
  • Page
    / 325
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 200
199
Continued
Driving
When Driving Shifting
Shift Lever Operation
Fully depress the clutch pedal to operate the shift lever and change gears, then
slowly release the pedal.
Depress the clutch pedal, and pause for a few seconds before shifting into
R , or
shift into one of the forward gears for a moment. This stops the gears so they do
not “grind.
Shifting
NOTICE
Do not shift to
R
before the vehicle comes to a
complete stop.
Shifting to
R
before stopping can damage the
transmission.
NOTICE
Before downshifting, make sure the engine will
not go into the tachometer's red zone. Should this
occur, it can severely damage your engine.
There is a metallic part on the shift lever. If you
leave the vehicle parked outside for a long time on
a hot day, be careful before moving the shift lever.
Because of heat, the shift lever may be extremely
hot. If the outside temperature is low, the shift lever
may feel cold.
Recommended Shift Points
Driving in the highest gear that allows the engine
to run and accelerate smoothly helps to optimize
fuel economy and effective emissions control. The
following shift points are recommended:
Shift Up Normal Acceleration
1st to 2nd 17 mph (27 km/h)
2nd to 3rd 29 mph (46 km/h)
3rd to 4th 37 mph (59 km/h)
4th to 5th 43 mph (69 km/h)
5th to 6th 49 mph (79 km/h)
If you exceed the maximum speed for the gear
you are in, the engine speed will enter into the
tachometer's red zone. When this happens, you
may experience a slight jolt.
Manual transmission models
Shifting
When you are not shifting, do not rest your
foot on the clutch pedal. This can cause your
clutch to wear out faster.
31TL1620.indb 199 2010/09/10 16:13:32
Page view 200
1 2 ... 196 197 198 199 200 201 202 203 204 205 206 ... 324 325

Comments to this Manuals

No comments