Acura 2012 TL User Manual download pdf (Page 476)

Park the vehicle, and set the

parking brake. Pull the hood

release handle located under the

lower left corner of the dashboard.

The hood will pop up slightly.

Turn the engine off, and confirm the

fuel fill cap is installed. If it is, loosen

it, then retighten it until it clicks at

least once. The message should go

off after several days of normal

driving once you tighten or replace

the fuel fill cap. To scroll to another

message, press the INFO button.

The ‘‘TIGHTEN FUEL CAP’’

message will appear each time you

restart the engine until the system

turns the message off.

If the system still detects a leak in

your vehicle’s evaporative emissions

system, the malfunction indicator

lamp (MIL) comes on. If the fuel fill

cap was not already tightened, turn

the engine off, and check or

retighten the fuel fill cap until it

clicks at least once. The MIL should

go off after several days of normal

driving once the cap is tightened or

replaced. If the MIL does not go off,

have your vehicle inspected by a

dealer. For more information, see

page .

1.

597

Opening and Closing the Hood

Service Station Procedures

472

HOOD RELEASE HANDLE

11/01/14 19:16:57 31TK4630_477

Before Driving

2012 TL

1 2 ... 471 472 473 474 475 476 477 478 479 480 481 ... 649 650

Comments to this Manuals

No comments