Acura 2010 RDX User Manual Page 432

  • Download
  • Add to my manuals
  • Print
  • Page
    / 514
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 431
3. Insert the dipstick all the way into
the transmission securely as
shown in the illustration.
4. Remove the dipstick and check the
fluid level. It should be between
the upper and lower marks.
5. If the level is below the lower
mark, remove the fill plug, then
add the fluid into the fill hole to
bring it to the level between the
upper and lower marks on the
dipstick.
Pour the fluid slowly and carefully
so you do not spill any. Clean up
any spills immediately; it could
damage components in the engine
compartment.
Always use Acura ATF-Z1 (automatic
transmission fluid).
Use only Acura ATF-Z1 (automatic
transmission fluid). Do not mix with
other transmission fluids.
Using transmission fluid other than
Acura ATF-Z1 may cause deterioration
in transmission operation and
durability, and could result in damage
to the transmission.
Damage resulting from the use of
transmission fluid other than Acura
ATF-Z1 is not covered by the Acura
new vehicle warranty.
6. Insert the dipstick all the way back
into the transmission securely as
shown in the illustration.
If you are not sure how to add fluid,
contact your dealer.
HOT
MARK
UPPER MARK
LOWER MARK
FILL PLUG
Automatic Transmission Fluid
428
09/07/07 15:02:04 10 ACURA RDX MMC North America Owner's M 50 31STK630 enu
2010 RDX
Page view 431
1 2 ... 427 428 429 430 431 432 433 434 435 436 437 ... 513 514

Comments to this Manuals

No comments